PLENARY SESSION - registered lectures | POSTER SESSION - registered posters

PLENARY SESSION - registered lectures

[01] Wednesday, 6 July 2016 9:00-9:40
S. K. Putatunda, S. Panneerselvam, M. Alshwigi
Processing of a nanostructured austempered ductile cast iron (ADI)

[02] Wednesday, 6 July 2016 9:40-10:10
A. Nofal
ADI - The material revolution and its applications at CMRDI

[03] Wednesday, 6 July 2016 10:10-10:35
E. Skołek, K. Wasiluk, W. Świątnicki, D. Myszka
The microstructure of the ductile iron after various austempering heat treatments - the time effect

[04] Wednesday, 6 July 2016 10:35-11:00
K. Wasiluk, E. Skołek, D. Myszka, W. Świątnicki
Nanostructured ductile iron for waste grinders

[05] Wednesday, 6 July 2016 11:20-11:55
B. Avishan, M. Abdolalipour, S. Yazdani
Austemperability of large chunk nanostructured steel designed based on thermodynamic model

[06] Wednesday, 6 July 2016 11:55-12:20
W. Świątnicki
Nanostructuring of commercial steels by heat treatment

[07] Wednesday, 6 July 2016 12:20-12:45
J. Marcisz, W. Burian, J. Janiszewski
Microstructural changes of the nanostructured bainitic steel induced by quasi-static and dynamic deformation

[08] Wednesday, 6 July 2016 14:10-14:45
M. A. Santajuana, R. Rementeria, M. Kuntz, F. G. Caballero, J. A. Jimenez, C. Garcia-Mateo
Understanding the tempering process of nanocrystalline bainite

[09] Wednesday, 6 July 2016 14:45-15:10
S. Marciniak, E. Skołek, W. Świątnicki
Controlling the phase composition of X37CrMoV5-1 steel with a nanobainitic structure by means of custom-designed heat treatments

[10] Wednesday, 6 July 2016 15:10-15:40
M. Soliman, H. Palkowski, A. Nofal
Multiphase ausformed austempered ductile iron

[11] Wednesday, 6 July 2016 15:40-16:05
T. Giętka, K. Ciechacki
Influence of chemical composition and heat treatment on charpy impact resilience of ADI

[12] Wednesday, 6 July 2016 16:05-16:30
D. Myszka, E. Skołek, A. N. Wieczorek, T. Giętka
Wear properties of low temperature NiCu ausferritic ductile iron

[13] Wednesday, 6 July 2016 16:30-16:55
G. Gumienny, B. Kurowska, T. Szymczak
Effect of nickel on the crystallization and microstructure of compacted graphite cast iron

[14] Thursday, 7 July 2016 9:00-9:40
A. Atrens, J. Venezuela, Q. Liu, Q. Liu, M. Zhang, Q. Zhou
Review of hydrogen effects in some martensitic steels

[15] Thursday, 7 July 2016 9:40-10:05
J. Krawczyk, E. Rożniata, S. Zimowski, M. Kot, R. Dądrowski, R. Dziurka, Ł. Frocisz
The role of microstructure in high temperature tribology of iron alloys

[16] Thursday, 7 July 2016 10:05-10:30
J. Dworecka, W. Piekoszewski, K. Rożniatowski, E. Jezierska, W. Świątnicki
Heat treatment effect on resistance to wear and rolling contact fatigue of 100CrMnSi6-4 steel

[17] Thursday, 7 July 2016 10:50-11:25
M. Gouné, F. Danoix, X. Sauvage, D. Huin, S. Allain
Phase transformations in modern steels: interaction of alloying elements with transformation interface

[18] Thursday, 7 July 2016 11:25-12:00
J. Pacyna
The principle of a sufficient hardenability of the light CCT diagrams

[19] Thursday, 7 July 2016 12:00-12:35
A. Grajcar
Thermodynamic analysis of phase transitions in advanced multiphase steel showing the transformation-induced plasticity effect

[20] Thursday, 7 July 2016 12:35-13:00
R. Kawulok, I. Schindler, P. Kawulok, S. Rusz, P. Opěla, P. Podolínský, K. M. Čmiel, M. Mališ
Transformation diagrams of selected steel grades with consideration of deformation effect

[21] Thursday, 7 July 2016 14:25-15:00
R. Parthiban, S. Ghosh Chowdhury, K. C. Harikumar, S. Sankaran
Evolution of microstructure and its influence on tensile properties in thermo-mechanically controlled processed (TMCP) quench and partition (Q&P) steel

[22] Thursday, 7 July 2016 15:00-15:25
D. Aišman, A. Ronešová, Š. Jeníček
Different routes for forming high-aluminium steel

[23] Thursday, 7 July 2016 15:25-15:50
B. Garbarz, M. Adamczyk, B. Niżnik-Harańczyk
Development of structural steel containing 3÷5 wt%Al with microlaminated microstructure

[24] Thursday, 7 July 2016 15:50-16:15
D. Hauserova, J. Dlouhy, P. Motycka
Structure refinement of spring steel 51CrV4 after accelerated spheroidisation

[25] Thursday, 7 July 2016 16:35-17:00
A. Gołaszewski, J. Szawłowski, W. Świątnicki
The microstructure evolution in the heat treatment process of UFG-TRIP steel

[26] Thursday, 7 July 2016 17:00-17:25
A. Kozłowska, A. Grajcar, W. Zalecki, W. Burian
Effect of strain on phase transformations of recrystallized and non-recrystallized austenite in TRIP-aided steels

[27] Thursday, 7 July 2016 17:25-17:50
L. Kučerová, J. Procházka, J. Káňa, H. Jirková
High versatility of niobium alloyed AHSS

[28] Thursday, 7 July 2016 17:50-18:15
A. Kokosza
Study of relationships between parameters of holding in bainitic range and microstructural components in medium carbon trip steel

[29] Friday, 8 July 2016 9:15-9:40
A. Kaijalainen, N. Vähäkuopus, M. Somani, S. Mehtonen, D. Porter, J. Kömi
The effects of finish rolling temperature and niobium microalloying on the microstructure and properties of a direct quenched high-strength steel

[30] Friday, 8 July 2016 9:40-10:05
A. Morri, L. Ceschini, M. Pellizzari, C. Menapace, F. Vettore, E. Veneri
Effect of austempering process on microstructure and mechanical properties of 27MnCrB5-2 steel

[31] Friday, 8 July 2016 10:05-10:30
P. Kawulok, I. Schindler, R. Kawulok, S. Rusz, P. Opěla, R. Olszar, M. Olszar, K. M. Čmiel
The influence of a cooling rate on evolution of microstructure and hardness of 27MnCrB5 steel

[32] Friday, 8 July 2016 10:30-10:55
K. Wasiak, E. Skołek, W. Świątnicki
Microstructure, wear resistance and mechanical properties of 35CrSiMn5-5-4 steel after quenching and partitioning processes

[33] Friday, 8 July 2016 11:15-11:40
R. Rana, S. Chen, S. Das, A. Haldar
Mechanical properties of a bainitic steel producible by hot rolling

[34] Friday, 8 July 2016 11:40-12:05
S. Wiewiórowska, Z. Muskalski
Carrying out the "hot" drawing process of trip steel wires at different initial temperatures

[35] Friday, 8 July 2016 12:05-12:30
K. Dychton, P. Rokicki, B. Wierzba, K. Raga, J. Sieniawski
Experimental verification of carburizing-quenching process of AISI 9310 steel gear shaft

[36] Friday, 8 July 2016 12:30-12:55
P. Rokicki
Induction hardening of tool steel for heavily loaded aircraft engine components

[37] Friday, 8 July 2016 14:20-14:45
M. Sut
Low pressure carburizing of Pyrowear® Alloy 53

[38] Friday, 8 July 2016 14:45-15:10
A. Ciski
Deep cryogenic treatment and tempering at different temperatures of HS6-5-2 high speed steel

[39] Friday, 8 July 2016 15:10-15:45
H. Dawson, M. Serrano, S. Cater, E. Jimenez-Melero
Friction stir welding of ODS steel: processing, characterization and stability

[40] Friday, 8 July 2016 15:45-16:10
M. Morawiec, A. Grajcar, M. Różański, S. Stano
Modified twin spot laser welding of complex phase steel

[41] Friday, 8 July 2016 16:10-16:35
S. Błacha, M. St. Węglowski, S. Dymek, M. Kopyściański
Comparison of microstructural characterization and mechanical properties of electron beam welded joints of high strength steel grade S960Q and Weldox 1300

[42] Friday, 8 July 2016 16:35-17:00
J. Pikuła, M. Łomozik, T. Pfeifer
The influence of manual metal arc multiple repair welding of long operated waterwall on the structure and hardness of the heat affected zone of welded joints

POSTER SESSION - registered posters

Poster session, P1
A. Ciski, P. Wach, A. Kapuścińska
Nitrided layers on X153CrMoV12 steel formed in a process combining gas nitriding with deep cryogenic treatment

Poster session, P2
J. Górka
Welding thermal cycle-triggered precipitation processes in steel S700MC subjected to the thermo-mechanical control processing

Poster session, P3
J. Górka, A. Czupryński, M. Adamiak
Properties and structure of nanocrystalline layers obtained by manual metal arc welding (MMA)

Poster session, P4
A. Grajcar, B. Grzegorczyk, M. Różański, S. Stano, M. Morawiec
Microstructural aspects of bifocal laser welding of trip steel

Poster session, P5
M. B. Jabłońska, J. Tomczak, A. Śmiglewicz
Numerical analysis of the process of dynamic tensile test of high manganese TWIP steel

Poster session, P6
D. Janicki
Microstructural evolution during laser surface alloying of ductile cast iron with titanium

Poster session, P7
D. Janicki, J. Górka, W. Kwaśny, K. Gołombek, M. Kondracki, M. Żuk
Diode laser surface alloying of armor steel with tungsten carbide

Poster session, P8
L. Kučerová, H. Jirková, B. Mašek
The influence of chromium addition on microstructure development of TRIP steel

Poster session, P9
L. Kučerová, K. Opatová, I. Zetková
Microstructure analysis of tool powder steels produced by additive manufacturing

Poster session, P10
S. Lesz, P. Skupień
Preparation and magnetic properties of Fe–based metallic glass

Poster session, P11
M. Łazarska, T. Z. Woźniak, Z. Ranachowski, P. Ranachowski, A. Trafarski
Application of acoustic emission and artificial neural networks for anlysis kinetics transition at isothermal austempering of tool steel

Poster session, P12
R. Michalczewski, W. Piekoszewski, M. Szczerek, W. Tuszyński
Surface fatigue life investigation of friction couples with nanocoatings

Poster session, P13
B. Mašek, O. Khalaj, H. Jirková, J. Svoboda
Processing of new ODS alloys with Fe-Al matrix and Al2O3 particles

Poster session, P14
M. Opiela
Thermodynamic and kinetic analysis of precipitation processes of MX-type phases in microalloyed steels

Poster session, P15
M. Popławski, A. Bartkowska, A. Piasecki
Results of the research into the oxidation process of 100Cr6 steel during continuous and isothermal heating

Poster session, P16
C. Rapiejko, B. Pisarek, T. Pacyniak
Effect of intensive cooling of alloy AM60 with chromium and vanadium additions on cast microstructure and mechanical properties

Poster session, P17
P. Rokicki, R. Chrupcala, K. Dychton
Acetylene flow rate as a crucial parameter of vacuum carburizing process of modern tool steels

Poster session, P18
E. Skołek, M. Rodakowski, W. Świątnicki
Hydrogen emibrittlement of the nanocrystalline 67SiMnCr6-6-4 steel

Poster session, P19
E. Skołek, W. Świątnicki
Nanocrystalline upper bainite

Poster session, P20
A. Śmiglewicz, G. Niewielski, M. B. Jabłońska
Evaluation of the ability of deformation energy absorption of an Mn-Al-Si high-carbon steel

Poster session, P21
J. Tuleja, Z. Zatorski
Numerical modelling of micro-stresses in carbonised austenitic cast steel under rapid cooling conditions

Poster session, P22
K. Uściński, S. Marciniak, W. Świątnicki
Influence of various heat treatments on distortion of X37CrMoV5-1 steel

Poster session, P23
P. Wach, J. Michalski, K. Burdyński
Nitrided layers with high corrosion resistance

Poster session, P24
M. Wasiluk, W. Świątnicki
Simulations of carbides precipitation in selected steels destined for nanostructurization

Poster session, P25
A. N. Wieczorek
Experimental studies on the abrasive wear of hard-wearing steels in the presence of diverse abrasive materials

Poster session, P26
A. N. Wieczorek
Experimental study on the impact of dynamic loads on the wear surface-hardened chain wheels produced from the alloy cast steel

Poster session, P27
A. N. Wieczorek
Influence of shot peening on abrasion wear in real conditions of Ni-Cu-Ausferritic Ductile Iron

Poster session, P28
A. N. Wieczorek
Operationally oriented studies on the resistance to abrasive wear of components of armoured face conveyors

Poster session, P29
A. N. Wieczorek
Operation-oriented identification of the tribocorrosion properties of steel and steel cast for mining applications

Poster session, P30
A. N. Wieczorek, A. Stachowiak
Forecasting the tribocorrosive wear of ADI cast iron containing Ni and Cu

Poster session, P31
D. Wilk-Kołodziejczyk
Supporting the manufacturing process of metal products with the methods of artificial intelligence

Poster session, P32
R. Władysiak, A. Kozuń, T. Pacyniak
The effect of water mist cooling of casting die on the solidification, microstructure and properties of AlSi20 alloy

Poster session, P33
K. Zadrożna, K. Wasiluk, W. Świątnicki,
Formation of a nanocrystalline structure in the ADI through designed heat treatment